Domo DO908DV Manuel d'instructions télécharger pdf (Page 34)

DO908DV

10. Close the door and hold it in position while you attach the upper hinge (5) to the

upper left corner of the freezer with the 2 screws (1). Make sure that the door is

straight before fastening the screws.

11. Place the cover (6) onto the upper hinge.

USE

Remove all packaging materials and any promotional stickers before use.

Clean the inside of the appliance with lukewarm water and some bicarbonate or soda

(5ml for 0,5l water). Do not use any soap or detergent, as the smell may linger. Dry

thoroughly.

Temperature control

The thermostat is located at the back of the freezer and can be set to MIN. (cold),

NORMAL (colder) or MAX (coldest).

The temperature can be inuenced by:

• The room temperature

• How often the door is opened

• How may food there is in the freezer

• The position of the appliance

Start-up

1. Wait 12 hours after installation to turn on the freezer.

2. Put the plug into the socket.

3. Turn the thermostat to the desired temperature setting.

4. Wait approximately 4 hours until the desired temperature is reached, before

putting food into the freezer.

Caution:

• Do not freeze food again after it has been defrosted already.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 49 50

Pas de commentaire

Domo DO908DV Manuel d'instructions Page 34